Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Automatic Voltage Regulation (AVR): Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Resettable circuit breaker; Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Telephone dataline surge protection: Provides protection of connected equipment from power surges traveling on telephone lines.
USB connection: Use your PC to access additional power protection and management features for your UPS via a USB Port.
APC Back-UPS 1400VA Features & Benefits
Safety:
Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Manageability
LED status display: Quickly understand unit and power status with visual indicators.
Audible alarms: Provides notification of changing utility power and UPS power conditions
Marketing features
Battery-protected and surge-only outlets
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Availability
Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Protection
Surge only outlets: Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Battery and surge protected outlets: Back up and protect your hardware and data during power outages, surges and spikes.
Technical Specifications
Output
Max Configurable Power (Watts): 700Watts / 1.4kVA
Output Frequency (sync to mains): 50/60 Hz +/-1 Hz
Output Frequency (not synced): 50/60 Hz +/-1 Hz
Topology: Line Interactive
Waveform type: Stepped approximation to a sinewave
Transfer Time: 8ms typical : 10 ms maximum
Input
Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
Input voltage range for main operations: 150 – 280 V
Number of Power Cords: 1
Type of Input Protection Required: 3-pole breaker
Input Power Factor at Full Load: 0.5
Batteries & Runtime
Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte – leakproof
Typical recharge time: 8hour(s)
Expected Battery Life (years): 2 – 5
Battery Volt-Amp-Hour Capacity: 168
Communications & Management
Interface Port(s): USB
Control panel: LED status display with On Line : On Battery : Replace Battery and Overload indicators
Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Surge Protection and Filtering
Surge energy rating: 273Joules
Data Line Protection: RJ-11 Modem/Fax protection
Physical
Maximum Height: 215MM, 21.5CM
Maximum Width: 130MM, 13.0CM
Maximum Depth: 336MM, 33.6CM
Net Weight: 12.0KG
Shipping weight: 12.94KG
Shipping Height: 295MM, 29.5CM
Shipping Width: 245MM, 24.5CM
Shipping Depth: 440MM, 44.0CM
Color: Black
Environmental
Operating Temperature: 0 – 40 °C
Operating Relative Humidity: 0 – 95 (non-condensing) %
Operating Elevation: 0-3000meters
Storage Temperature: -15 – 40 °C
Storage Relative Humidity: 0 – 95 (non-condensing) %
Storage Elevation: 0-9000meters
Audible noise at 1 meter from surface of unit: 45.0dBA
Conformance
Approvals: A-tick, C-tick, CE, IEC 62040-1-1, Telepermit
Standard warranty: 1-year repair or replace
Sustainable Offer Status
RoHS: Compliant
REACH: REACH: Contains SVHCs
There are no reviews yet.